+7 (8313) 27-25-84, 27-25-72


Grinding aids line.

A feature of the InCEM E series is the composition of the components selected for the active grinding effect for cements.

The chemicals used in the InCEM E series effectively reduce the energy consumption of ball mills due to the extremely high capsulating effect of the grinding aid. This series helps to significantly reduce the coating of grinding media and the mill’s liner plates.

  • Application
  • Specification
  • Dosage
  • Storage and warranty
InCEM E used to:
  • Increase mill output;
  • Decrease energy consumption;
  • Increase product flowability;
  • Decrease the mill inspection and overhaul time period
InCEM E used for grinding:
  • Cements;
  • Marble;
  • Microcalcite;
  • Microsilica;

The InCEM E series is an aqueous solution of triethanolamine commercial, methyldiethanolamine derivatives, triatomic alcohols with modifying additives.
The series is available with numeric indexes from 100 to 1000, depending on the ratio of components.
The dry residue and the freezing point is not standardized.

Physical – chemical indicators for InCEM E series
Clear liquid from light brown to black color
Density at 20 °С, g/cm3 1,10-1,18
рН, at 20 °С 8,0 - 10,0
Alkaline number, mmol of HCl/gr of product 1 - 5

Dosage intervals for various materials, in% to the ground material:

Marble from 0,035 to 0,3 %
Microcalcite from 0,04 to 0,10 %
Cement from 0,01 to 0,08 %
Microsilica from 0,05 to 0,10 %

The optimum dosage is selected experimentally.

The dosing of the grinding aid is possible directly in first chamber of the mill, and together with the material coming through conveyor belt, or disc feeders.

The warranty period for the InCEM grinding aid is 1 year from the date of manufacture.
After the expiration of the warranty period the product should be mixed, the test performance should be made and in case of positive results is possible for application. Storage is carried out in atmospheric conditions. With temperaTSre below minus 15 ° C may freeze. After soft and continuous heating the product does not lose its properties. The product is transported by any means of transport, in accordance with the rules of transportation for this type of transport. According to GOST 19433 products are not classified. By effects on the human, the product belongs to the 4th class of hazard (low hazard substance).


TS № 2499-001-78722668-2008 with 1, 2 add. >>
SP № 78722668.20.46823 >>
Expert report № 08/01-655 >>
SRC № RU.52.НЦ.05.008.Е.000218.12.12 >>
Technical data sheet >>
InCEM brochure >>
Staff picture

Timofey Zemskov

is responsible for product group
of a «Grinding aids» direction
Sintez OKA – Construction chemistry LLC

Request for Sintez OKA*
Contact information
Your request
↑ Необходимо согласие на обработку личной информации.
* Fields marked in red, must be filled in send message
Message succefully sended.