+7 (8313) 27-25-84, 27-25-72

Construction chemistry


---------- Back to the main «Sintez OKA» website

Macromonomer SINTEPEG 2400

(registered trade name) Chemical name: Methyl polyethylene glycol, polyethylene glycol monomethyl ether; IUPAC chemical name: Alpha-2-Methylpro-2-enyl-omega-hydroxypoly (hydroxy-1,2-ethandyol); Common designations: APEG 2400, HPEG 2400, SPEG 2400; SINTEPEG 2400

Methallylpolyethylene glycol SINTEPEG is a high-molecular-weight, water-soluble non-ionic monomer with a molecular weight of 2400, obtained by ethoxylation of metallyl alcohol.

It is produced in two product forms:
  • Scaled powder;
  • 60% aqueous solution;

SINTEPEG 2400 application:

Scope of use "SINTEPEG" 2400 - as an initial macromonomer for the polycarboxylate ethers synthesis.

  • Application
  • Specification
  • Packing
  • Storage and warranty

he product is intended for use as a base material in the production of polycarboxylate ethers.

Available in two brands:
  • SINTEPEG 2400 - anhydrous product form in the form of solid flakes;
  • SINTEPEG-2400/60 - aqueous solution;

The product is highly soluble in water and fats.
The molecular weight is 2120-2740.

Parameters SINTEPEG  
Appearance at (25±5) °С white powder colorless liquid
Hydrogen ion activity index 1% aqueous solution of the product at (20 ± 5) ° С, unit pH 5 - 7 5 - 7
Hydroxyl number, mg KOH / g, in the interval 20,5 - 26,5 -
Iodine number, g I2 / 100 g, not less 9,5 5,7
Mass fraction of the main substance, %,not less 90,0 -
Mass fraction of dry residue, %, not less - 60,0
Mass fraction of the main substance in dry residue, %, not less - 90,0

The flake form of SINTEPEG 2400 is packaged in big bags with polyethylene liner with a net weight of 750 kg; An aqueous solution of SINTEPEG 2400/60 is poured into:
- polyethylene barrels with a capacity of 227 liters;
- IBC containers, 1000 liters;

The warranty period for the SINTEPEG 2400 is 1 year from the date of manufacture.
To prevent polymerization and clumping, the SINTEPEG 2400 macromonomer is recommended to be stored at a temperature not higher than + 30 ° C. The lower limit of temperature is not specified. To prevent crystal formation and polymerization, SINTEPEG 2400/60 macromonomer should be stored at a temperature of 10 to 30 ° C. As a result of long-term storage at lower temperatures, precipitation may occur in the SINTEPEG 2400/60. The product does not lose its quality, but before use it is need to be heated to a temperature of 20-30 ° C and homogenized.


TS № 20.16.40-012-78722668-2018 >>
SP № 78722668.20.54069 >>
Expert report № 08/01-5902 >> SRC № RU.Е.000021.10.15 >>
Technical data sheet >>
Staff picture

Oleg Kuharev

Director of
Sintez OKA – Construction chemistry LLC

Request for Sintez OKA*
Contact information
Your request
↑ Необходимо согласие на обработку личной информации.
* Fields marked in red, must be filled in send message
Message succefully sended.