+7 (8313) 27-25-84, 27-25-72


Quality improvers line.

InCEM ES series are cement quality improvers, the effect of which is aimed for early strength development and maximally replacing clinker with mineral additives. Along with this, this line shows satisfactory indicators as grinding aid.

The InCEM ES series based on the use of isopropanolamines and polyethers in compositions with polyhydric alcohols.

  • Application
  • Specification
  • Dosage
  • Storage and warranty
InCEM ES used to:
  • Increase mill output and decrease energy consumption;
  • Improve 2 days strength;
  • Increase the involvement of mineral additives in cement, while maintaining the strength standards;
  • Provide stable cement strength development in steaming;
InCEM ES used for grinding:
  • OPC and blended cements;
  • Marble, Microcalcite, Microsilica (optional).

The InCEM E series is an aqueous composition of isopropanolamines and polyethers in compositions with polyhydric alcohols. The series is available with numeric indexes from 100 to 1000, depending on the ratio of components.
The dry residue and the freezing point is not standardized.

Physical – chemical indicators for InCEM E series

Clear liquid from yellow to brown color
Density at 20 °С, g/cm3 1,05-1,15
рН, at 20 °С 7,5 - 9,5
Alkaline number, mmol of HCl/gr of product not standardized

Dosage intervals for various materials, in% to the ground material: from 0,025 till 0,15 % The optimum dosage is selected experimentally.

*The action of isopropanolamines significantly depends on the amount of ferric phase C4AF in clinker. For most active strength development at 28 days, the content of C4AF in clinker must be greater than 11%.

The dosing of the grinding aid is possible directly in first chamber of the mill, and together with the material coming through conveyor belt, or disc feeders.

The warranty period for the InCEM grinding aid is 1 year from the date of manufacture.
After the expiration of the warranty period the product should be mixed, the test performance should be made and in case of positive results is possible for application. Storage is carried out in atmospheric conditions. With temperaTSre below minus 15 ° C may freeze. After soft and continuous heating the product does not lose its properties. The product is transported by any means of transport, in accordance with the rules of transportation for this type of transport. According to GOST 19433 products are not classified. By effects on the human, the product belongs to the 4th class of hazard (low hazard substance).


TS № 2499-001-78722668-2008 with 1, 2 add. >>
SP № 78722668.20.46823 >>
Expert report № 08/01-655 >>
SRC № RU.52.НЦ.05.008.Е.000218.12.12 >>
Technical data sheet >>
InCEM brochure >>
Staff picture

Timofey Zemskov

is responsible for product group
of a «Grinding aids» direction
Sintez OKA – Construction chemistry LLC

Request for Sintez OKA*
Contact information
Your request
↑ Необходимо согласие на обработку личной информации.
* Fields marked in red, must be filled in send message
Message succefully sended.